Weldable structural steel
S960QL1 / 1.8934 non-alloy structural steel
S960QL1 / 1.8934 is a weldable structural steel. W.Nr. 1.8934. It is welded. It is not hardened. Typically supplied as plate, round bar, flat bar. We cut to length and ship with EN 10204/3.1.
- Delivery conditions
- +AR or +N
- Also known as
- 1.8934, s960ql1
Designations
- W.Nr.
- 1.8934
- EN standard
- S960QL1
- Group
- Non-alloy structural steel
What it is used for
Welded structures, plate and bar in S960QL1. Sawn or cut to size with 3.1.
Limits
Switch to a quenched and tempered steel if the part is to be hardened. S690QL when weight has to come down and the welding procedure can keep up.
Delivery
We source S960QL1 from European mill partners as plate, round bar, flat bar, cut to your dimensions and ship the certificate with the material. Typical condition: +AR or +N. From a single cut piece to larger lots — with no minimum charge, so you do not have to buy a full commercial length to get what you need.
Certificates and documentation
S960QL1 can be supplied with a material certificate to EN 10204, depending on producer, dimension and the requirements specified for the delivery. On welded structures it is the analysis, the strength class and — where the standard requires it — the impact toughness that the certificate must show. EN 10204 3.1 can be supplied on a wide range of our materials, and 3.2 is ordered when the project requires third party.
Dimension programme
| Form | Range | Note |
|---|---|---|
| Round bar | Ø40–250 mm | Hot-rolled bar, cut to length. |
| Flat bar | Cut to order | Flat bar. |
| Plate | 5–120 mm thickness | Structural plate. No page per thickness. |
The range is a delivery programme, not a stock statement. Length is cut to your drawing.
Read more
Send your enquiry
State grade, dimensions and quantity — or attach a drawing. We reply with a quote.