Cold-work tool steel
115CrV3 / 1.2210 tool steel
115CrV3 (1.2210) is silver steel: high carbon, chromium and vanadium. Bright bar for mandrels, punches and small tools.
- Delivery conditions
- soft annealed
- Also known as
- 1.2210
Designations
- W.Nr.
- 1.2210
- EN standard
- 115CrV3
- Group
- Tool steel
What it is used for
Mandrels, reamer blanks and small cold-work tools that are hardened after turning.
Limits
1.2510 when it is oil-hardening tool plate. 1.2379 when production has to last.
Delivery
We source 115CrV3 from European mill partners as round bar, flat bar, plate, cut to your dimensions and ship the certificate with the material. Typical condition: soft annealed. From one sawn piece of the block to a series of parts — with no minimum charge.
Certificates and documentation
115CrV3 can be supplied with a material certificate to EN 10204, depending on producer, dimension and the requirements specified for the delivery. Tool steel is bought on W.Nr. and condition, and we write the number on the paper that the mill can carry — not a trade name the certificate does not cover. If a specific delivery hardness is to be documented, it must be on the order. EN 10204 3.1 can be supplied on a wide range of our materials.
Dimension programme
| Form | Range | Note |
|---|---|---|
| Round bar | Ø0.7–60 mm drawn, ground and polished | Silver steel. Tolerance h9 to DIN 175, tighter h8–h6 on request. Bars in 2 m, also 1 or 3 m. |
| Flat bar | Flat cut to order | Typically mould and cold-work flat. |
| Square bar | 0.7–60 mm | Same drawn range as round. State side length. |
| Plate | To order | Not structural plate. |
The range is a delivery programme, not a stock statement. Length is cut to your drawing.
Read more
Send your enquiry
State grade, dimensions and quantity — or attach a drawing. We reply with a quote.