Heat-resistant stainless steel
316H / 1.4919 stainless steel
316H / 1.4919 is a heat-resistant stainless steel. W.Nr. 1.4919. It holds its oxide scale in dry heat — it is not a 316L for wet chlorides. Typically supplied as seamless tube, welded tube, round bar.
- Delivery conditions
- solution annealed
- Also known as
- 1.4919, X5CrNiMo17-12-2, 316H
Designations
- W.Nr.
- 1.4919
- EN standard
- X5CrNiMo17-12-2
- Group
- Stainless steel
What it is used for
Furnace parts, flue gas and dry heat, where 316H has to hold its scale.
Limits
Dry heat. Not a first choice in wet chlorides — that is 316L or duplex.
Delivery
We source 316H from European mill partners as seamless tube, welded tube, round bar, cut to your dimensions and ship the certificate with the material. Typical condition: solution annealed. Standard: X5CrNiMo17-12-2. From a single cut piece to larger lots — with no minimum charge, so you do not have to buy a full commercial length to get what you need.
Certificates and documentation
316H can be supplied with a material certificate to EN 10204, depending on producer, dimension and the requirements specified for the delivery. On stainless, the analysis and the delivery condition are what the certificate shows. If a specific test or an ageing/hardening condition is to be documented, it must be specified before we order. EN 10204 3.1 can be supplied on a wide range of our materials.
Dimension programme
| Form | Range | Note |
|---|---|---|
| Round bar | Ø8–200 mm | Solution annealed unless otherwise stated on the PO. |
| Seamless tube | Ø13.5–Ø508 mm | DN8–DN500. Wall up to 31 mm. ASME 1/4–16″. |
| Welded tube | Ø21.3–Ø610 mm | Welded stainless. Wall to ISO 1127. State whether the weld seam must be documented. |
| Fittings | Ø12–Ø2000 mm | ASME 1/2–60″ (Ø15–Ø1524 mm). Type A and B. Not a stock statement. |
| Flanges | Ø14–Ø2000 mm | ASME 1/2–60″ (Ø15–Ø1524 mm). PN 6–400. Not a stock statement. |
The range is a delivery programme, not a stock statement. Length is cut to your drawing.
Read more
Send your enquiry
State grade, dimensions and quantity — or attach a drawing. We reply with a quote.