Austenitic stainless steel
316 / 1.4401 stainless steel
316 / 1.4401 is a Mo-alloyed austenite. Molybdenum lifts chloride resistance above 304.
- Delivery conditions
- solution annealed
- Also known as
- 1.4401, X5CrNiMo17-12-2, AISI 316, SS 2347
Designations
- W.Nr.
- 1.4401
- EN standard
- X5CrNiMo17-12-2
- DIN
- 1.4401
- AISI/SAE
- 316
- SS (Sweden)
- 2347
- UNS
- S31600
- JIS
- SUS316
- Group
- Stainless steel
What it is used for
Process, near-marine and food applications where 304 pits.
Limits
316L for welding. 316Ti when stabilisation is specified. Duplex when both strength and chloride demands are high.
Delivery
We source 316 from European mill partners as round bar, plate, flat bar, seamless tube, welded tube, cut to your dimensions and ship the certificate with the material. Typical condition: solution annealed. Standard: X5CrNiMo17-12-2. From a single cut piece to larger lots — with no minimum charge, so you do not have to buy a full commercial length to get what you need.
Certificates and documentation
316 can be supplied with a material certificate to EN 10204, depending on producer, dimension and the requirements specified for the delivery. On stainless, the analysis and the delivery condition are what the certificate shows. If a specific test or an ageing/hardening condition is to be documented, it must be specified before we order. EN 10204 3.1 can be supplied on a wide range of our materials.
Dimension programme
| Form | Range | Note |
|---|---|---|
| Round bar | Ø8–200 mm | Solution annealed unless otherwise stated on the PO. |
| Flat bar | Cut to order | Stainless flat. |
| Plate | 2–50 mm thickness | State thickness and finish. |
| Seamless tube | Ø13.5–Ø508 mm | DN8–DN500. Wall up to 31 mm. ASME 1/4–16″. |
| Welded tube | Ø21.3–Ø610 mm | Welded stainless. Wall to ISO 1127. State whether the weld seam must be documented. |
| Fittings | Ø12–Ø2000 mm | ASME 1/2–60″ (Ø15–Ø1524 mm). Type A and B. Not a stock statement. |
| Flanges | Ø14–Ø2000 mm | ASME 1/2–60″ (Ø15–Ø1524 mm). PN 6–400. Not a stock statement. |
The range is a delivery programme, not a stock statement. Length is cut to your drawing.
Read more
Send your enquiry
State grade, dimensions and quantity — or attach a drawing. We reply with a quote.