What is the Werkstoff number for P235GH?

The Werkstoff number is 1.0345. The same grade may appear as P235GH, 1.0345 or both on the drawing.

In which condition is P235GH supplied?

Typically +N / +NT. State the condition the certificate must carry.

Which dimensions can Industristål supply in P235GH?

P235GH / 1.0345 as round bar typically Bar to order. Length is cut. The range is a delivery programme — not a stock statement.

Can Industristål supply a single piece in P235GH?

Yes. We also supply single pieces and small quantities with no minimum charge. You do not have to take a full commercial length.

Can the material be supplied with a 3.1 certificate?

Yes. EN 10204/3.1 can be supplied where relevant for P235GH. 3.2 is ordered before we lock the material.

Pressure vessel steel

P235GH / 1.0345 pressure vessel steel

P235GH is non-alloy pressure vessel steel to EN 10028-2 and EN 10216-2. W.Nr. 1.0345. It is the boiler tube in the 235 class — sister to P265GH, not a dimension of S235.

Request a quote Send drawing – get a price +45 77 34 00 96

Delivery conditions: +N / +NT
Also known as: 1.0345

Designations

W.Nr.: 1.0345
EN standard: P235GH
Group: Pressure vessel steel

What it is used for

Seamless boiler tubes, bends and tees with TC1 or TC2. Plate when the drawing says P235GH.

Limits

P265GH when 265 is specified. P235TR1 when it is pressure tube without the GH temperature requirement.

Delivery

We source P235GH from European mill partners as plate, flat bar, round bar, seamless tube, welded tube, cut to your dimensions and ship the certificate with the material. Typical condition: +N / +NT. From a single cut piece to larger lots — with no minimum charge, so you do not have to buy a full commercial length to get what you need.

Certificates and documentation

P235GH can be supplied with a material certificate to EN 10204, depending on producer, dimension and the requirements specified for the delivery. On pressure-bearing material the certificate is part of the product: standard, condition and tests must be on the enquiry, and 3.2 must be agreed before the material is locked at the mill. EN 10204 3.1 can be supplied on a wide range of our materials — 3.2 and third party by project, when the mill can issue it.

Dimension programme

Form	Range	Note
Round bar	Bar to order	When the form is bar, not plate.
Plate	6–80 mm thickness	PED and certificate govern the size — not a bar Ø.
Seamless tube	Ø6–Ø2000 mm	Seamless DIN/EN. Wall to EN 10220. State DN, wall and 3.1/3.2.
Welded tube	Ø6–Ø2000 mm	Welded DIN/EN. Wall to EN 10220. State weld seam and certificate.
Fittings	Ø12–Ø2000 mm	ASME 1/2–60″ (Ø15–Ø1524 mm). Type A and B. Not a stock statement.
Flanges	Ø14–Ø2000 mm	ASME 1/2–60″ (Ø15–Ø1524 mm). PN 6–400. Not a stock statement.

Parts of the range are held by European partners; other dimensions can be sourced. The range is not a current stock status in every diameter — stock is confirmed on enquiry.

Frequently asked questions

What is the Werkstoff number for P235GH?: The Werkstoff number is 1.0345. The same grade may appear as P235GH, 1.0345 or both on the drawing.
In which condition is P235GH supplied?: Typically +N / +NT. State the condition the certificate must carry.
Which dimensions can Industristål supply in P235GH?: P235GH / 1.0345 as round bar typically Bar to order. Length is cut. The range is a delivery programme — not a stock statement.
Can Industristål supply a single piece in P235GH?: Yes. We also supply single pieces and small quantities with no minimum charge. You do not have to take a full commercial length.
Can the material be supplied with a 3.1 certificate?: Yes. EN 10204/3.1 can be supplied where relevant for P235GH. 3.2 is ordered before we lock the material.

More grades and dimensions in Danish

Send your enquiry

State grade, dimensions and quantity — or attach a drawing. We reply with a quote.

Request a quote +45 77 34 00 96