Pressure vessel steel
P275NH / 1.0487 pressure vessel steel
P275NH is normalised pressure vessel steel in the 275 class. NH is elevated temperature — not the NL low-temperature certificate.
- Delivery conditions
- +N / +NT
- Also known as
- 1.0487
Designations
- W.Nr.
- 1.0487
- EN standard
- P275NH
- Group
- Pressure vessel steel
What it is used for
Pressure plate where P265GH needs to go one step up without going to P355.
Limits
P355NH is the usual switch up. P275NL1 when low temperature governs.
Delivery
We source P275NH from European mill partners as plate, flat bar, round bar, cut to your dimensions and ship the certificate with the material. Typical condition: +N / +NT. From a single cut piece to larger lots — with no minimum charge, so you do not have to buy a full commercial length to get what you need.
Certificates and documentation
P275NH can be supplied with a material certificate to EN 10204, depending on producer, dimension and the requirements specified for the delivery. On pressure-bearing material the certificate is part of the product: standard, condition and tests must be on the enquiry, and 3.2 must be agreed before the material is locked at the mill. EN 10204 3.1 can be supplied on a wide range of our materials — 3.2 and third party by project, when the mill can issue it.
Dimension programme
| Form | Range | Note |
|---|---|---|
| Round bar | Bar to order | When the form is bar, not plate. |
| Plate | 6–80 mm thickness | PED and certificate govern the size — not a bar Ø. |
| Fittings | Ø12–Ø2000 mm | ASME 1/2–60″ (Ø15–Ø1524 mm). Type A and B. Not a stock statement. |
| Flanges | Ø14–Ø2000 mm | ASME 1/2–60″ (Ø15–Ø1524 mm). PN 6–400. Not a stock statement. |
The range is a delivery programme, not a stock statement. Length is cut to your drawing.
Read more
Send your enquiry
State grade, dimensions and quantity — or attach a drawing. We reply with a quote.