What is the Werkstoff number for S355J2H?

The Werkstoff number is 1.0576. The same grade may appear as S355J2H, 1.0576 or both on the drawing.

In which condition is S355J2H supplied?

Typically +AR or +N. State the condition the certificate must carry.

Which dimensions can Industristål supply in S355J2H?

S355J2H / 1.0576 as round bar typically Only if the drawing is plate. Length is cut. The range is a delivery programme — not a stock statement.

Can Industristål supply a single piece in S355J2H?

Yes. We also supply single pieces and small quantities with no minimum charge. You do not have to take a full commercial length.

Can the material be supplied with a 3.1 certificate?

Yes. EN 10204/3.1 can be supplied where relevant for S355J2H. 3.2 is ordered before we lock the material.

Weldable structural steel

S355J2H / 1.0576 non-alloy structural steel

S355J2H is structural steel for hollow sections to EN 10210. W.Nr. 1.0576. Same 355 MPa class and J2 impact toughness as S355J2 — but a different number, because it is tube, not plate.

Request a quote Send drawing – get a price +45 77 34 00 96

Delivery conditions: +AR or +N
Also known as: 1.0576, SS 2172 / 2174, S355J2H+N

Designations

W.Nr.: 1.0576
EN standard: S355J2H
SS (Sweden): 2172 / 2174
Group: Non-alloy structural steel

What it is used for

Square, rectangular and circular hollow sections in welded structures.

Limits

S355J2 when it is plate or bar. S275J0H when 275 is sufficient in the tube.

Delivery

We source S355J2H from European mill partners as plate, flat bar, round bar, seamless tube, welded tube, cut to your dimensions and ship the certificate with the material. Typical condition: +AR or +N. From a single cut piece to larger lots — with no minimum charge, so you do not have to buy a full commercial length to get what you need.

Certificates and documentation

S355J2H can be supplied with a material certificate to EN 10204, depending on producer, dimension and the requirements specified for the delivery. On welded structures it is the analysis, the strength class and — where the standard requires it — the impact toughness that the certificate must show. EN 10204 3.1 can be supplied on a wide range of our materials, and 3.2 is ordered when the project requires third party.

Dimension programme

Form	Range	Note
Plate	Only if the drawing is plate	H and hollow section grades are tubes. Plate is the corresponding EN 10025 grade.
Seamless tube	Ø6–Ø2000 mm	Seamless DIN/EN. Wall to EN 10220. State DN, wall and 3.1/3.2.
Welded tube	Ø6–Ø2000 mm	Welded DIN/EN. Wall to EN 10220. State weld seam and certificate.
Fittings	Ø12–Ø2000 mm	ASME 1/2–60″ (Ø15–Ø1524 mm). Type A and B. Not a stock statement.
Flanges	Ø14–Ø2000 mm	ASME 1/2–60″ (Ø15–Ø1524 mm). PN 6–400. Not a stock statement.

Parts of the range are held by European partners; other dimensions can be sourced. The range is not a current stock status in every diameter — stock is confirmed on enquiry.

Frequently asked questions

What is the Werkstoff number for S355J2H?: The Werkstoff number is 1.0576. The same grade may appear as S355J2H, 1.0576 or both on the drawing.
In which condition is S355J2H supplied?: Typically +AR or +N. State the condition the certificate must carry.
Which dimensions can Industristål supply in S355J2H?: S355J2H / 1.0576 as round bar typically Only if the drawing is plate. Length is cut. The range is a delivery programme — not a stock statement.
Can Industristål supply a single piece in S355J2H?: Yes. We also supply single pieces and small quantities with no minimum charge. You do not have to take a full commercial length.
Can the material be supplied with a 3.1 certificate?: Yes. EN 10204/3.1 can be supplied where relevant for S355J2H. 3.2 is ordered before we lock the material.

More grades and dimensions in Danish

Send your enquiry

State grade, dimensions and quantity — or attach a drawing. We reply with a quote.

Request a quote +45 77 34 00 96